The Dot-series modules enable the users to implement
IEEE802.15.4 or ZigBee compliant systems. They are
derived from the U-series modules by attaching a
pin-header 2x14 (pitches: 2.54mm)
to the interface boards. Flexible RF connectors
including SMA and SMC are implemented. Through the GSG
(ground-signal-ground) interface on the U-series
modules, the RF loss is kept to less than 0.3dB. The
core of the Dot-series modules also use UBEC’s UZ2400,
the 802.15.4 compliant transceiver which features a
maximum of 5 MHz serial interface SPI bus for control
and data transfer. Currently three Dot-series modules
are available: Dot-Force Rev.B, Dot-Power500 and
Dot-Power1000. They are formed by combining the
respective U-series modules and the interface boards.
Because of the flexibility offered by the interface
boards, these modules can be readily used for various
instruments and applications.
Features
●
2.4GHz
IEEE 802.15.4 and ZigBeeTM Compliant
●
Dot-Force -Rev.B ■
PCB
Antenna
■
Bias:
2.4V~3.6V
■
Sleep current :2
μA
■
>100m range
■
Sensitivity: -96dBm
■
Tx Power : 0dBm
■
Tx Current : 24mA
■
Rx Current : 20mA
●
Dot-Power500 ■
Sleep current:3
μA ■
Bias:
3.0V~3.6V ■
>500m range ■
SMA/SMC Connector ■
Sensitivity: -101dBm ■
Tx Power :
11dBm ■
Tx Current :
54mA
■
Rx Current : 26mA
●
Dot-Power1000 ■
Bias:
3.0V~3.6V ■
>1000m range ■
SMA/SMC Connector ■
Sensitivity: -101dBm ■
Tx Power :
22dBm ■
Tx Current :
155mA ■
Rx Current :
32mA
PCB of Dot-force Module
